HP Photosmart D5463 - Manual (Page 9)

5. Lower the photo tray lid.
Avoid paper jams
To help avoid paper jams, follow these guidelines.
• Remove printed papers from the output tray frequently.
• Prevent curled or wrinkled photo paper by storing all unused photo paper flat in a
resealable bag.
• Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.
• If you are printing labels, ensure that the label sheets are no more than two years old.
Labels on older sheets might peel off when the paper is pulled through the product,
and cause paper jams.
• Do not combine different paper types and paper sizes in the input tray; the entire stack
of paper in the input tray must be the same size and type.
• Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure
the paper-width guide does not bend the paper in the input tray.
• Do not force paper too far forward in the input tray.
• Use paper types that are recommended for the product.
Print directly onto a CD/DVD
You can design and create a custom label for your CD or DVD using the software that
came with the HP Photosmart. You can then print the label directly onto your printable
CD or DVD media.
1. Use the software that came with the product to create a label and print it directly on
an inkjet printable CD/DVD.
2. When prompted, carefully remove the CD/DVD holder that came with the product.
The CD/DVD holder is stored below the main input tray.
Print directly onto a CD/DVD 7
Overview