Heath Zenith 6168 User Manual

Page 6

-6-

595-5724-04

12345678

* Code Settings 1-7

Must Match Both

Sensor and Chime

Inside

Sensor

Remove

screw to open

access door

Back of Chime

4. To change the code, either:

• Add a jumper to the same location on both the sensor and the chime

or...

• Remove a jumper from the same location on both the sensor and the

chime

or...

• Move a jumper on the sensor from one location to another. Move the corre-

sponding jumper on the chime to match the new location in the sensor.

Example: Move jumper at location “5” to location “4” on both the sensor

and the chime.

Note: Jumpers in positions 1 through 7 must be exactly the same for both
the sensor and chime for this system to function.
Note: Unit will come factory set with jumpers in locations 5, 6, and 7 on the
sensor and on the chime.
The range of the wireless chime can vary with location, temperature, and
battery condition.

Note: Some models might require the use of
tweezers to remove and replace the jumpers.

HeathCo LLC reserves the right to discontinue and to change specifications at any time
without notice without incurring any obligation to incorporate new features in previously
sold products.