Heath Zenith 6168 - Manual (Page 4)

-4- 595-5724-04
12345678
1
2
3
4
5
6
7
8
Inside
Sensor
Remove screw to
open access door
Back of Chime
Tune Setting
Tune Setting (Not
used on all models)
Note: Some models might require
the use of tweezers to remove and
replace the jumpers.
Tune Settings
Your Heath ® /Zenith wireless chime has different selectable tunes: Ding (one
note), Ding-Dong (two note), or Westminster (eight note) (Available on se-
lected Heath ® /Zenith chimes). The factory setting is for the Ding-Dong tune
(or Westminster, when available). This tune can be changed by following the
instructions below.
•
Ding (one note tune)
Sensor: Add a jumper to location 8.
•
Ding-Dong (two note tune)
Sensor: Remove jumper from location 8.
Chime: Remove jumper from location 8.
•
Westminster (Eight note tune) (Available on selected Heath ® /Zenith
chimes)
Sensor: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You may pur-
chase any Heath
® /Zenith wireless push button for a second entrance.