Hawking Technology Wireless-G Router - Manual (Page 35)

Advanced Administration
Reset Click Reset to restore to default values.
Navigation & Data Input
•
Use the menu bar on the left of the screen, and the "Back" button on your Browser,
for navigation.
•
Changing to another screen without clicking "Save" does NOT save any changes
you may have made. You must "Save" before changing screens or your data will be
ignored.
PC Configuration
4
This Chapter details the PC Configuration required on the local ("Inter-
nal") LAN.
Overview
For each PC, the following may need to be configured:
•
TCP/IP network settings
•
Internet Access configuration
•
Wireless configuration
Windows Clients
This section describes how to configure Windows clients for Internet access via the
Wireless Router.
The first step is to check the PC's TCP/IP settings.
The Wireless Router uses the TCP/IP network protocol for all functions, so it is essential
that the TCP/IP protocol be installed and configured on each PC.
TCP/IP Settings - Overview
If using the default Wireless Router settings, and the default Windows
TCP/IP settings, no changes need to be made.
•
By default, the Wireless Router will act as a DHCP Server, automatically provi ding a
suitable IP Address (and related information) to each PC when the PC boots.
•
For all non-Server versions of Windows, the default TCP/IP setting is to act as a
DHCP client.