Hawking Technology Wireless-G Router - Manual (Page 34)

Time Zone Setting
Current Time Enter the current time of this wireless router.
Enable NTP client
update Check to enable NTP ( Network Time Protocol Server) client
update function.
Time Zone Select Select the time zone from the pull-down menu.
NTP server You may choose to select NTP server from the pull-down menu
or enter an IP address of a specific server.
Save After completing the settings on this page, click Save to
save the settings.
Reset Click Reset to restore to default values.
Refresh Click to refresh the current time.
Upgrade Firmware
Browse Click the Browse button, find and open the firmware file
(the browser will display to correct file path).
Start Upgrade Click the Start Upgrade button to perform