Hawking Technology Wireless-G Router - Manual (Page 21)

Advanced Administration
System Data Click to show the detailed information of the system
Refresh Screen Click to refresh all the data
Wireless Basic Settings
Disable Access Point Check to disable the Access Point function.
(Disables Wireless Access in your Network)
The wireless (WLAN) LED on front panel will remain OFF if
the Wireless interface is disabled.
Band
You can choose one mode of the following you need.
¤ 2.4GHz (B): 802.11b supported rate only.
¤ 2.4GHz (G): 802.11g supported rate only.
¤ 2.4GHz (B+G): 802.11b supported rate and 802.11g sup-
ported rate.
The default is 2.4GHz (B+G) mode.
Channel Number Select which channel be located (from 1 to 11).
Associated Clients Click to show all the listed active clients.
Save After completing the settings on this page, click Save to save
the settings.
Reset Click Reset to restore to default values.