Harbor Freight Tools 97719 - Manual (Page 3)

Page 3 SKU 97719 For technical questions, please call 1-800-444-3353.
SAVE thiS mAnuAL
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual near
the assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and dry
place for future reference.
impORtAnt SAFEtY
inFORmAtiOn
in this manual, on the labeling,
and all other information
provided with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DAngER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARning
indicates a hazardous
situation which, if not
avoided, could result in death
or serious injury.
CAutiOn, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
nOtiCE is used to
address practices
not related to personal injury.
CAutiOn, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
general Safety Rules
WARning! Read all instructions
Failure to follow all instructions
listed below may result in
electric shock, fire, and/or
serious injury. The term “power
tool” in all of the warnings listed
below refers to your line-operated
(corded) Arc Welder.
SAVE thESE inStRuCtiOnS
Work area safety 1.
Keep work area clean and well a.
lit. Cluttered or dark areas invite
accidents.
Do not operate power tools in
b.
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep children and bystanders
c.
away while operating a power tool.
Distractions can cause you to lose
control.