Safety ( continued ) 7 – Heat Controller PE-91A PE-121A User Manual
Page 9
9
Heat Controller, Inc.
1900 Wellworth Avenue
Jackson, MI 49203
This unit is provided with Leakage Current Detection and Interruption circuit
(LCDI) built into the plug of the power supply cord. This device provides
protection to reduce the risk of fire due to arcing faults in the power supply
cord. Before use, follow the “Plug Testing Instructions” to ensure that the
LCDI circuit functions properly.
PLUG TESTING INSTRUCTIONS:
1. Press Test Button.
It should trip.
2. Press Reset Button
firmly for use. Reset
Button may require
pressure to engage.
DO NOT USE IF ABOVE TEST FAILS
Do not use the TEST and RESET buttons as an on/off switch. They are
only meant to be used for periodically checking the LCDI plug.
CALL CUSTOMER SERVICE IF TEST FAILS.
Replace defective cords only with genuine replacement parts from
Heat Controller.
SAFETY (continued)
7.
(Plug on unit may vary from picture.)