Heat Controller PE-91A PE-121A - Manual (Page 14)

14
Heat Controller, Inc.

1900 Wellworth Avenue

Jackson, MI 49203
OPERATION
9.
9.3 Auto, Cool, Heat, Dry, Fan Mode
You can operate the unit using the Control Panel on the unit, or with the
Remote Controller.
Auto Mode:
1. Plug the Power Cord into the power outlet.
2. Turn on the unit by pressing the ON/OFF Button on the Control Panel.
3. Press the Mode Button until the signal “ “ appears on the display.
4. Select the fan speed by using the FAN button.
During the AUTO mode, the unit will operate in HEAT mode when the room
temperature is below 70°F.
The unit will operate in FAN only mode when the room temperature is between
70°F and 80°F.
The unit will operate in COOL mode when the room temperature is above 80°F.
Cool Mode:
1. Plug the Power Cord into the power outlet.
2. Turn on the unit by pressing the ON/OFF Button on the Control Panel.
3. Press the Mode Button until the signal appears on the display.
4. Set the room temperature to your desired room temperature with
Temperature Changing Button.
5. Set temperature range from 64°F to 90°F.
6. Recommended temperature for your comfort: is 82°F to 86°F.
7. Select fan speed by pressing the FAN Button.