Heat Controller PE-91A PE-121A - Manual (Page 11)

11
Heat Controller, Inc.

1900 Wellworth Avenue

Jackson, MI 49203
1. Measure the window the unit will be installed into and adjust the telescoping
Window Panels to fit into the window. If window is either too wide or too
tall, fill the remaining space with foam or other appropriate material. Make
sure that the holes on the Window Panel are exposed for connection of
Window Kit Adaptor.
2. Screw the hose clockwise into the Terminal End, and the other end of the
hose to the Window Kit Adaptor. Apply same procedures to both air inlet
hose and air outlet hose.
3. Secure the Terminal End to the Exhaust Port. Apply same procedures to
both air inlet hose and air outlet hose.
4. Connect the Window Kit Adaptor to each of the holes on the Window Panel.
VERTICAL HORIZONTAL
INSTALLATION
8.
8.1 Installation Procedures