Heat Controller PE-91A PE-121A - Manual (Page 16)

16
Heat Controller, Inc.

1900 Wellworth Avenue

Jackson, MI 49203
Press TIMER
button. Digit
“3” will flash
on LED
display.
TIMER LED
indicator will
illuminate.
OPERATION 9.
9.4 Timer Setting Procedure
ON-TIMER Program Setting:
When the unit is OFF, you can program the ON TIMER to start the unit after desired
number of hours. Procedure:
Preset
desired
operation
mode.
Press
or
button to
desired
hours.
Number
of hours
will
appear
on LED
10-second
pause after
pressing
or button
signals
completion of
timer
programming.
Number of hours on LED
display will count down as
time lapses. When the
display shows “0” , meaning
programmed hour expires, the
product will start operation in
the preset mode. If you do
not preset mode before
setting ON TIMER, the unit
will start in the mode of last
operation.
HOW TO CANCEL ON-TIMER Program Setting:
Press TIMER button.
Number of hours will
flash on LED display
Press TIMER button again.
Number of hours will disappear on
LED display. TIMER LED
indicator light will turn off.
ON-TIMER program
cancelled.
OFF-TIMER Program Setting:
Press TIMER
button. Digit
“3” will flash on
LED display.
TIMER LED
indicator will
illuminate.
Press or
button to
your desired
hours.
Number of
hours will
appear on LED
display.
10-second pause after
pressing or
button signals
completion of timer
programming. Indicator
will illuminate.
When the
programmed hour
expires, the product
will stop.
Press TIMER button.
Number of hours will
flash on LED display
Press TIMER button again.
TIMER LED indicator will turn off.
Set temperature will appear on
LED display.
OFF-TIMER program
cancelled.
HOW TO CANCEL OFF-TIMER Program Setting: