HONDA Outboard Motor BF130A - Manual (Page 70)

68
Lubrication Points
SERVICING YOUR OUTBOARD MOTOR
TRANSOM ANGLE
ADJUSTING ROD/
SWIVEL CASE
SHIFT SHAFT
PROPELLER SHAFT
TILT BRACKET
TILT SHAFT
SHIFT ARM
THROTTLE ARM/
SHIFT ARM SHAFT THROTTLE REEL
Apply Honda Marine Corrosion Inhibitor (or equivalent) to all areas under the engine cover except the belts.
Wipe the outside of the engine with a cloth dipped in oil.
Apply marine anticorrosion grease to the following parts:
Lubrication interval:
After the first 20 hours or 1 month, then every 100 hours
or 6 months. (Refer to the maintenance schedule page
).
Apply anticorrosion oil to pivot surfaces where grease
cannot penetrate.
58
02/10/28 13:56:18 31ZW5601_069