HP 720 Series - Manual (Page 39)

3-Using playback and the main menu 39
USB configuration setting
This option determines how the
camera appears when connected to
a computer.
1 In the Setup menu, select the
USB Configuration option.
2 In the USB Configuration menu,
use the Arrow buttons to
make one of the following choices and press OK.
• Digital Camera - causes the computer to recognize the
camera as a digital camera (Picture Transfer Protocol
(PTP) standard). This is the default setting on the camera.
• Disk Drive - causes the computer to recognize the
camera as a disk drive (Mass Storage Device Class
(MSDC) standard). Use this setting for unloading and
sharing on a Macintosh computer or on Windows
system that does not have the HP Photo & Imaging
software installed on it.