HP DL560 - Manual (Page 31)

System Unit Rack Chassis Footprint
(HxWxD) 3.38 x 17.50 x 25.75 in (8.59 x 44.45 x 65.41 cm)
Weight Maximum (2 Power
Supplies, 2 Hard Drives) 60 lb (27 kg)
Minimum (No hard drives
installed, one power
supply) 35 lb (16 kg)
Input Requirements Rated Input Voltage 100 to 120 VAC/200 to 240 VAC
Rated Input Frequency 50 to 60 Hz
Input Power 690W @ 115 VAC/675W @ 230 VAC
Rated Input Current 7A (100 VAC), 6A (115 VAC), 3A (230 VAC)
Max BTU Rating 2375 BTU (550 Watts)
Power Supply Output
Power (per power
supply) Rated Steady-State
Power 550W/550W (lowline/highline)
Maximum Peak Power 550W/550W (lowline/highline)
Temperature Range Operating 50° to 95° F (10° to 35° C)
Non-operating -20° to 140° F (-29° to 60° C)
Shipping -22° to 122° F (-30° to 50° C)
Relative Humidity
(non-condensing) Operating 10% to 70%
Non-operating 5% to 95%
Maximum Wet Bulb
Temperature 101.7° F (38.7° C)
Acoustic Noise NOTE: Listed are the declared A-weighted sound power levels LWAd
and the declared average bystander position sound pressure levels
LpAm when operating in a 23° C ambient environment. Noise emissions
were measured in accordance with ECMA 74 and declared in
accordance with ECMA 109.
Idle (Fixed Disk Drives
Spinning)
L WAd (BELS) 6.0
L pAm (dBA) 46
NOTE: These values apply to 2U rack configuration. Configuration
tested included 2 processors, two 10, 000 rpm hard drive, 1 power
supplies, 1 power supply fan and 4 CPU fans.
QuickSpecs
HP ProLiant DL560
Technical Specifications
DA - 11595 Worldwide QuickSpecs — Version 46 — 12.16.2005 Page 31