HP CC330 - Manual (Page 17)

BASIC OPERATION
Shooting in Auto Mode
Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes
your photos for best results.
To start shooting, do the following:
1. Press Power to turn the camera on.
2. In the Mode menu, select the Auto mode ( ).
3. Compose your picture on the LCD screen and press the Shutter button halfway to focus on the subject.
4. The LCD screen will show a green focus frame after the subject is in focus.
5. Press Shutter fully to capture the image.
Using the Zoom Function
Your camera is equipped with two types of zoom functions:
optical zoom and digital zoom. Use the Zoom toggle of the
camera to zoom in or out on the subject while taking pictures.
When the optical zoom reaches its maximum value, release
the Zoom toggle then press it again for it to go further at the
digital zoom. Zoom indicator is hidden after the Zoom togle is
released. The screen shows ( ) for the current zoom status.
Basic Functions Menu
The Basic Function Menus of the camera include Flash, Self-timer, Macro Capture, and Exposure Compensation.
The suitable function setting can let you shoot better photos.
Set the basic functions as per the following steps:
1. Pull up the Basic Function Menus by pressing
Right/Flash button.
2. Press Left/Right button to select the settings of the required function.
Zoom button