Humax F2-FOXT - Manual (Page 46)

**
8.2 Manual Search
You can search channels manually by searching parameters, if you know the MUX information.
1. Channel Number
Enter your desired frequency channel to search. When entering frequency channel value, the
appropriate frequency value is entered.
1. Select Channel using the button, and press the
OK or button.
2. Select one of channel using the button, and press
the OK button.
2. Frequency
Enter the your desired frequency to search directly. When entering frequency, the appropriate
channel for the entered frequency is automatically displayed on Channel.
1. Select Frequency using the button, and press the
OK or button.
2. Enter frequency using the NUMERICAL (0-9) button and
press OK button.
3. Mode
Required for Channel Search. If you don't know the value, please select Auto.
1. Select Mode using the button, and press the OK
or button.
2. Select among Auto, 2k and 8k using the button,
and press the OK button.
**
**
GB 45
**
**
**
**
**
**
**
**
**
**
**
**
**
**