Setup – Humax F2-FOXT User Manual
Page 13
**
This chapter describes how to set up the receiver. Select the most appropriate procedure depending
on your case.
Note:
If you encounter any problem when setting up the receiver, please contact your local
product distributor.
Where possible, use an outdoor roof aerial intended for receiving UHF channels between
21 and 69.
It is not advisable to use indoor or window mounted aerials, as digital channels will be
difficult or even impossible to receive.
2.1 Connecting Aerial
1. Connecting TV and VCR
**
•
Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver.
•
Scart and co-axial cable are connected as in the figure above.
**
2. Setup
GB 12
**
**
**
**
**
**
**
**
**
**
**
**
**
**