Huffy Universal Elevator Mount - Manual (Page 9)

9
10/01 P/N 211125A
FLAT SURFACE MOUNTING
1.
A solid mounting base and/or surface,
capable of withstanding normal
recreational use forces, must be
provided by the customer. A reliable
carpenter or building contractor should
be consulted if there are questions
regarding this procedure.
WARNING
MOUNTING
HOLE
PATTERN
2.
Secure mounting brackets (24) to flat solid
surface. Install bolt heads outside for safety
reasons.
NOTE: Hardware for this procedure not
included due to various roof construction
materials and design structure.
Mark bracket positions on flat solid surface. Upper bracket mounting holes
should be located approx. 106” (2.7 m) above playing surface. Drill four, 3/8”
(9.5 mm) holes into solid structure for mounting brackets (24).
PLAYING
SURFACE
106”
(2.7 m)
24
24
8”
(20.3 cm)
4”
(10.16 cm)