Huffy Universal Elevator Mount - Manual (Page 8)

8
P/N 211125A 10/01
FOR POLE MOUNTING ONLY
1.
Assemble mounting brackets (24) to 3-1/2” (8.9 cm) pole as shown.
Position bracket assembly to approx. 106” (2.7 m) above level playing
surface. Tighten nuts (28) completely. NOTE: Equal rotations of nuts on
each side of u-bolt (25) are necessary.
2.
NOTE: Two people required for this
procedure, elevator assembly is
heavy. Mount assembled elevator
components to mounting bracket (24) as
shown. (Refer to Steps 6 through 13 for
elevator assembly.)
26
24
27
28
25
;;
;;
PLAYING
SURFACE
106”
(2.7 m)
18
17
22
24