Harbor Freight Tools CENTRAL PNEUMATIC 46309 - Manual (Page 2)

SKU 46309 Page 2 For technical questions, please call 1-800-444-3353.
Brad Size .039-.042” Shank (18 Gauge), 3/8” to 2” long
Magazine Capacity 100
Operating PSI 55-95 PSI
Air Inlet Size 1/4” NPT Male
Safety Feature Full Sequential Safety Trip Mechanism
Dimensions 9-3/4” L x 8-5/8” H x 2-1/4” W
Accessories Two Hex Wrenches, Lubricating Oil
Specifications
Fasteners available from Harbor Freight Tools: SKU 33205-3/4”, SKU 33206-1”,
SKU 33207-1-3/16”, 91221-2”.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lit. Do not use electrically powered
tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it was
not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines or air hoses.
REV 08a