Humax LAU-26TPVR - Manual (Page 64)

Default Setting
Default Setting restores the LCD-TV to the default settings
Warning : Please Note that once you perform Default Setting, all data
such as Aerial Setting information Channel List, and User
Configured data are deleted.
To perform Factory Default:
1. Press the DTV SETUP button.
2. Select Installation using the
̵/̷ button, and press the
OK or ൘ button.
3. Select Default Setting using
the ̵/̷Gbutton, press the
OK or ൘ button.
4. Select Yes and press the OK button
to restore all setting to Factory
Default. Select No and press the OK
or BACK button to return to the previous menu.
5. Confirm again to start loading default setting. Enter Password using the
NUMERICAL (0~9) buttons to confirm that you wish to restore the default
settings.
6. When default setting is completed, Installation Wizard is automatically
displayed, which helps Channel Search. For detailed information about
Installation Wizard, refer to Digital TV Channel Setup.
Note : In the Default Setting, you need a Password to enter. The Default
Password is 0000 . If you have forgotten your Password, please
contact your local LCD-TV distributor.
Installation
63. Installation