Humax LAU-26TPVR - Manual (Page 19)

Setting the Analogue Channels
18. Setting the Analogue Channels
Setting the Analogue Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on
your country.) Automatically allocated programme numbers may not correspond to
actual or desired programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch. It
˅s only for analogue TV mode.
1. Press the MENU button.
2. Select Channel using the ̵/̷ button, and press the OK or ൘Gbutton.
3. Select Auto Programme using the ̵/̷ button, and press the OK or ൘ button.
4. Select System using the ̵/̷ button, and press the ൖGor ൘ button to select
a particular system.
BG : I : DK
5. Select Storage From using the ̵/̷ button, and press the ൖ, ൘ or NUMERICAL
(0~9) button to enter the starting number to store the scanned programme.
6. Select Start Search using the ̵/̷ button, and press the OK or ൘ button
to start auto scanning. To stop the search before it has finished, press
the BACK button.
The search will end automatically. Channels are sorted and stored in an order,
and then the programme originally selected is displayed.
In the digital TV mode, you can select Setup Digital Channel menu instead
of Channel menu.