Humax LAU-26TPVR - Manual (Page 28)

Setting the Current Time
You can set the current time. If you wish to use the Power On or Off Time,
you must also set the Local Time.
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select Time Setting using the ̵/̷ button, and press the OK or ൘Gbutton.
4. Select Date using the ̵/̷Gbutton, and press the OK or ൘Gbutton.
5. Press the ̵/̷/ൖ/൘Gbutton to set the current date.
6. When you are satisfied with your choice, press the OK button to store the date.
7. Select Local Time using the ̵/̷ button, and press the OK or ൘ button.
8. Press the ̵/̷/ൖ/൘ button to set the current time.
9. When you are satisfied with your choice, press the OK button
to store the time.
Note : The LCD-TV sets and updates the time automatically by the air,
if you successfully search digital terrestrial channels.
You must set the GMT Offset value in DTV Setup menu. Refer
DTV SETUP - Preferences - Local Setting menu for more detail
information.
Automatically Turning the TV On and Off
You can automatically switch on or off at the time you select.
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select Time Setting using the ̵/̷ button, and press the OK or ൘ button.
4. Select Power On/Off Time using the ̵/̷ button, and press the
GGGGൖ or ൘ button to select Enable or Disable.
5. In the Enable mode, Select Timer using the ̵/̷ button, and press
the OK or ൘ button.
6. Press the ̵/̷/ൖ/൘ button to set the time.
7. When you are satisfied with your choice, press the OK button to store the time.
8. Select Auto Power Off using the ̵/̷Gbutton, and press the ൖ or ൘ button
to select Enable or Disable. In setting the Auto Power Off to Enable,
the LCD TV turns off automatically if there is no signal.
Setting the Time
27. Setting the Time