Humax LAU-26TPVR - Manual (Page 22)

Basic Operation
21. Basic Operation
Powering the TV On/Off
1. Connect the plug to the wall outlet.
2. Press the MAIN POWER button on the rear of the LCD-TV to turn the TV power on.
3. Press the STANDBY, TV/AV or CH +/- button on the front of the LCD-TV or
press the STANDBY, TV/AV, CH +/- or NUMERICAL (0~9) buttons on the
remote control to switch the TV on.
Note : To place the TV in standby mode, press the STANDBY button
again on the remote control or on the front of the LCD-TV.
It can be useful when you wish to interrupt viewing temporarily
(during a meal, for example).
4. To turn the TV power off, press the MAIN POWER button on the rear of the
LCD-TV.
Note : Do not leave the TV in standby mode for too long (on holiday,
for example). Turn the TV off by pressing the MAIN POWER button
on the rear of the LCD-TV. It is best to disconnect the power cord.
Changing the Input mode
1. Press the TV/AV button to change the input mode.
2. Select your desired mode using the ̵/̷ button, and press the OK button.
You can also change the input mode by pressing the TV/AV button repeatedly.
Volume Control
1. Press the VOL +/- buttons to adjust the audio volume.
2. Press the MUTE button to mute the sound.
Selecting the Channel
1. Press the CH +/- or NUMERICAL (0~9) buttons to change the
channel number.
Choosing Your Language
When you start using your television for the first time, you must select the language
which will be used for displaying menus and indications.
1. Press the MENU button.
2. Select System using the ̵/̷ button, and press the OK or ൘ button.
3. Select Language using the ̵/̷ button, and press the ൖGor ൘ button to
select a particular language.
4. When you are satisfied with your choice, press the EXIT button to return
to normal viewing.