beautypg.com

Options – Heatcraft Refrigeration Products CLIMATE CONTROL CC-HTSTB User Manual

Page 4

background image

4

Options

Electrical options:

Outdoor

Indoor

Stock

Adjustable low pressure control for medium temp. comp.

Option

Option

N/A

Air or electric defrost timer only

Option

Option

1/2-3 HP low temp.

Beacon II™

Option

N/A

N/A

Crankcase heater

Standard

N/A

Standard

Dual pressure control (not available on Beacon II™)

Option

Option

N/A

Electric defrost with timer & contactors (040-060 models only)

Option

Option

4-6 HP low temp.

Fixed fan cycling — pressure or temperature (2 fan units)

(Pressure standard on Beacon II™)

Option

Option

N/A

Fused disconnect / Non-fused disconnect

Option

Shipped loose

N/A

Phase loss / low voltage monitor

Option

Option

N/A

Smart Defrost Kit™ (Factory-Installed)

Option

Option

N/A

Variable speed EC (VSEC) motors with Orbus™ controller

Option

N/A

N/A

Mechanical options:

12" Extended legs for snowbelt operation

Shipped loose

Shipped loose

Shipped loose

Head pressure control flooding valve

Standard

Option

Standard

Liquid line drier, sight glass

Option

Option

Standard

Liquid line solenoid valve and pumpdown switch

Option

Option

N/A

Low ambient kit with heated and insulated receiver, TD relay

Option

N/A

N/A

Oil separator with discharge line check valve (D cabinet)

Option

Option

N/A

Oversize receiver (D cabinet)

Option

Option

N/A

Precharged refrigerant with quick connect fittings

Option

Option

N/A

Replaceable core liquid line filter (D cabinet)

Option

Option

N/A

Replaceable core suction line filter (D cabinet)

Option

Option

N/A

Suction accumulator

Option

Option

N/A

Suction line filter

Option

Option

N/A

The Beacon II™ Refrigeration System is a preassembled, factory installed refrigeration
system featuring an integrated microcomputer based electronic control board.
The Beacon II™ Refrigeration System replaces the expansion valve, solenoid valve, room
thermostat, defrost control and timer. It comes factory preset thereby eliminating all

of the expensive and time consuming fine tuning and adjustments necessary for a good system installation. For
additional information, contact your Sales Representative.

E Solutions branded products and options are designed to exceed current energy and environmental

standards. It is our commitment in environmental innovation to dedicate ourselves by delivering

energy efficient eco-conscious choices. Products included in the E Solutions portfolio reduce costs,

improve bottom lines, and enhance equipment performance and service life.

The Beacon II™ Refrigeration System with Smart Defrost, factory-installed Smart Defrost Kit™ and

Variable Speed EC (VSEC) motor with Orbus controller are E Solutions options that will optimize

your savings and increase energy efficiency.