Heatcraft Refrigeration Products CLIMATE CONTROL CC-HTSTB - Manual (Page 3)

3
Features & Benefits
Typical Outdoor Hermetic Unit
Typical Outdoor Unit with throwaway liquid-line
filter and sight glass
Typical Outdoor Hermetic Unit with liquid filter drier
and sight glass
Cabinet & Construction
• Microchannel coil technology standard on all units
• Painted steel cabinets for superior strength and corrosion protection
• Heavy duty steel raised base with 1-1/2" legs
• Fan guards and wiring conduit on indoor models
Serviceability
• Suction service valves for hermetic and scroll compressors located
outside the cabinet for quick installations. Semi-hermetic compressor
models have a suction valve on the compressor and an access fitting
on the suction line entering the cabinet.
• Receiver with fusible plug, liquid shutoff valve and charging port
is standard
• Large electrical panel for ease of access
• Prefabricated wiring harnesses for tight crimp connections and
consistent labeling
• Unit stays on if the hood is removed for servicing
• Sight glass is easily viewable
Quality
• All units are completely leak tested in a helium environment,
bump tested and allowed to cycle off on the high and low pressure
control. Each unit has a copy of the run data shipped inside the
electrical panel
• Electrical circuits are completely checked for continuity
• Piping is laid out to minimize stress and vibration and is pre-bent to
eliminate leaks
• Encapsulated, auto-reset, high and low pressure controls to
eliminate leaks (standard on all high and medium temperature
models, adjustable low pressure control standard on low
temperature models)
Components
Fan
• Specifically matched with motor and coil to attain maximum air
movement and cooling
Motor
• Rated for 50 and 60 cycle application
• Standard PSC or optional Variable Speed EC (VSEC) with
Orbus™ Controller
Compressor
• Wide variety of compressors including: hermetic, semi-hermetic and
scroll. R-404A/507 available for both medium and low temperature
applications
• Spring-mounted compressors with vibration eliminators on all 1-1/2
to 6 HP semi-hermetic compressors; 1/2 to 1 HP compressors are
rigid mounted and have a discharge loop
• Discharge service valves come standard on all units
including hermetics