Specifications, Save this manual, Safety warnings and precautions – Harbor Freight Tools 45949 User Manual
Page 2
Page 2
SKU 45949
Specifications
ITEM
DESCRIPTION
Cutting Capacity
Steel: up to 3/8"; Aluminum up to 5/16";
Stainless steel 1/4" to 5/16"
Power Requirement
230 VAC, 60 Hz, single phase, 35 amps
Air Pressure Requirement
70 PSI
Power Output
20 ~ 35 amps
Duty Cycle
80% at 20 amps; 35% at 35 amps
Gas Consumption
3.5 CFM at 70 PSI
Line Cord
10 foot, UL approved (without plug)
Torch Cable
20 foot
Ground Cable
15 foot
Accessories
3 - electrode tips
3 - nozzles
Overall Dimensions
12-5/8 (W) x 17-7/8 (L) x 31 (H) inches
Weight
98.5 lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it was
not intended.