Recording video triggered by an external device – Honeywell HRTL-One User Manual
Page 45
Rev 1.00
36
Document 900.0259
10/04
Operation
P
The OSD looks similar to the following:
Recording Video Triggered by an External Device
You can program the HRTL-One to record from an external device (see Pin 6 on
). This external device trigger causes the HRTL-One to immediately start
recording, at the recording speed and video quality configured for Record mode (see
).
The OSD looks similar to the following:
2002 - JAN-01 01:02:03
A OW
Legend
A = Alarm trigger
= Recording
OW = HDD overwrite
= 32GB. If the OW shows 32GB,
it means that the hard drive
has 32 GB capacity left
for storing recorded video.
2002 - JAN-01 01:02:03
E OW
Legend
E = External trigger record
= Recording
OW = HDD overwrite
= 32GB. If the OW shows 32GB,
it means that the hard drive
has 32 GB capacity left
for storing recorded video.