Honeywell HRTL-One - Manual (Page 33)

HRTL-One Digital Video Recorder User Guide
Rev 1.00 23 Document 900.0259
10/04
P
5. If you have completed all your system configuration changes, press Menu again to
exit and close menu setup.
Clearing the Data on the Hard Drive
Caution Clearing the data on the hard drive results in permanent, irreversible loss of
all video and other information currently stored on the hard drive.
To remove all the data from the hard drive:
1. On the System screen (Main Menu ➤ System), press S or T to select Clear
HDD, then press Enter.
2. Press S or T to choose:
Yes = Clear the hard drive.
No = Do not clear the hard drive at this time.
When you select Yes, the following screen displays:
Figure 3-4 Clear Hard Drive Screen
3. Press X to clear the hard drive or W to abort the clear process.
4. Press Menu to exit this screen and confirm the current operation.
5. If you have completed all your system configuration changes, press Menu again to
exit and close menu setup.
Resetting to System Defaults
To reset the system to the factory default settings:
1. On the System screen (Main Menu
➤ System), press S or T to select System
Reset, then press Enter.
All Data in HDD
Will be Cleared
Are You Sure?
( I : No J : Yes)