Hitachi VM-H620A - Manual (Page 59)

General Maintenance - 59 -
operations are accepted. date/title battery. And after about one
minute, the display in the viewfinder will
be reset. Then set the information
again.
The camcorder does not operate when
alkaline batteries are inserted. Check that the polarities (+, -) of the
batteries are correct.
Insert six batteries.
TAPE DISPLAY
Symptom Check Point & Correction
Tape appears in the viewfinder. Have you moved the camcorder or
cassette from a cold place to a warm
place so that its temperature changed
abruptly? If the temperature has
changed, remove the cassette and set
the CAM/OFF/VIDEO switch to OFF,
then wait for about one hour.
Remove the cassette and then try to
reinsert, remove it several times. IF
the indication is still shown in the
viewfinder, use a cleaning tape to clean
the heads and replace the cassette.
Specifications
General Specifications
Power requirements 6V DC
Power consumption VM-H620A: 5.3W (when recording)
VM-H720A: 5.9W (when recording)
Dimensions 3-11/16" W x 4-3/4" H x 8-5/16" D (94mm x 120mm x 211mm)
Weight VM-H620A: 1.91 lbs (approx. 870g) without battery pack, lens
hood, lens
cap
or cassette
VM-H720A: 1.89 lbs (approx. 860g) without battery pack, lens
hood, lens cap or cassette
Operating temperature 32°F ~ 104°F (0°C ~ 40°C)
Storage temperature -4°F ~ 140°F (-20°C ~ 60°C)