HP Photosmart 612 - Manual (Page 39)

Sharing and printing images 31
Using the camera with a Macintosh
computer
System requirements for a Macintosh
computer
To work with your camera, your Macintosh computer must meet or
exceed the following requirements. For updated system
requirements, go to www.hp.com/photosmart.
Changing the PC Connect Mode setting
Before you can unload images from the camera to a Macintosh,
you must change the connection setting in the Setup menu.
1 Turn on the camera.
2 Press the dial twice to open the main menu.
3 Turn the dial to scroll to the Setup icon.
4 Press the dial to open the Setup menu.
5 Turn the dial to scroll to PC Connect Mode, and then press
the dial.
Operating system Macintosh OS 8.6 or later
Processor Power PC, 233 MHz
Memory (RAM) 64 MB (128 MB recommended)
OSX requires 128 MB
Free hard disk
space 150 MB
Video display 800 by 600 pixels, 16-bit color
CD-ROM Any speed
Virtual memory Recommend setting to 96 MB to run Arcsoft
software
SwUG.book Page 31 Tuesday, September 25, 2001 1:30 PM