HP Photosmart 612 - Manual (Page 18)

HP photosmart 612 User Guide 10
When the lens reaches either the extreme wide or extreme
telephoto position it stops moving even if you continue to press
the control.
To use the digital zoom
1 Turn on the camera and go to Prieview mode.
2 Press the zoom control toward the telephoto ( ) position and
hold it.
3 Release the control and then press the zoom control toward
the telephoto ( ) position again to activate digital zoom. The
image display comes on automatically and 2X DIGITAL ZOOM
appears in the status line.
Note Digital zoom works in Preview mode only.
Using the self-timer
Use the self-timer to take a picture of yourself or a posed group.
After you turn on the self-timer and press the
SHUTTER button, the
camera waits 10 seconds before taking the picture.
Zoom control
SwUG.book Page 10 Tuesday, September 25, 2001 1:30 PM