Harbor Freight Tools 65063 - Manual (Page 9)

SKU 65063 For technical questions, please call 1-800-444-3353. Page 9
The Solar Charger will immediately 5.
begin charging the mobil unit, as indi-
cated by the Electric Current Output
Lamp (2) illumnating.
(See Figure A.)
IMPORTANT: Refer to the mobile
6.
unit manufacturer’s recommended
charge time for the unit. do not
overcharge. Overcharging may
damage the mobile unit.
When finished charging the mobil
7.
unit, unplug the Solar Charger’s Plug
Adapter (9) from the mobil unit.
(See Figure A.)
Disconnect the Plug Adapter (9)
8.
from its Connection Cord (10). Then
disconnect the Connection Cord from
the Solar Charger’s Electric Current
Output Receptacle (7).
(See Figure A.)
mAintEnAnCE And
SERViCinG
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
tO pREVEnt
SERiOuS injuRY
FROm ACCidEntAL
OpERAtiOn:
unplug the AC/dC Adapter
from its electrical outlet
before performing any
inspection, maintenance, or
cleaning procedures.
tO pREVEnt SERiOuS
injuRY FROm pROduCt
FAiLuRE:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
inspection, maintenance, and
Cleaning
BEFORE EACH USE, inspect the 1.
general condition of the Solar Char-
ger and its accessories. Check for
loose screws, misalignment or bind-
ing of moving parts, cracked or bro-
ken parts, damaged electrical wiring,
and any other condition that may
affect its safe operation.
TO CHANGE THE LITHIUM BAT-
2.
TERY: Poor product performance
may be a sign the Lithium Battery
(12) is worn out. It is recommended
that a qualified technician replace the
battery.
(See Figure B, next page.)
AFTER USE,
3. clean the surface of
the Solar Charger periodically with a
clean, damp, soft cloth for best per-
formance. Do not use solvents, acid,
or alkali products.
WARninG! if the power Cord of
4.
the AC/dC Adapter is damaged, it
must be replaced only by a quali-
fied service technician.