Save these instructions, Grounding – Harbor Freight Tools 65063 User Manual

Page 5

SKU 65063

For technical questions, please call 1-800-444-3353.

Page 5

handling. (California Health & Safety

Code § 25249.5, et seq.)
The warnings, precautions, and in-

12.

structions discussed in this instruction

manual cannot cover all possible con-

ditions and situations that may occur.

It must be understood by the operator

that common sense and caution are

factors which cannot be built into this

product, but must be supplied by the

operator.

SAVE tHESE

inStRuCtiOnS.

double insulated tools: tools

with two prong plugs

Tools marked “Double Insulated” do

not require grounding. They have

a special double insulation system

which satisfies OSHA requirements

and complies with the applicable

standards of Underwriters Labora-

tories, Inc., the Canadian Standard

Association, and the National Electri-

cal Code.

(See Outlets for 2-prong

plug.)
Double insulated tools may be used

in either of the 120 volt outlets shown

in the preceding illustration.

(See

Outlets for 2-prong plug.)

Extension Cords

Grounded

tools require a three wire

extension cord. Double Insulated

tools can use either a two or three

wire extension cord.
As the distance from the supply outlet

increases, you must use a heavier

gauge extension cord. Using exten-

sion cords with inadequately sized

wire causes a serious drop in voltage,

resulting in loss of power and pos-

sible tool damage.

(See table A.)

GROundinG

tO pREVEnt

ELECtRiC SHOCK

And dEAtH FROm

inCORRECt GROundinG

WiRE COnnECtiOn:

Check with a qualified

electrician if you are in doubt

as to whether the outlet is

properly grounded. do not

modify the AC/dC Adapter

Cord plug provided with the

Solar Charger. do not use the

Solar Charger if the AC/dC

Adapter power Cord or plug

is damaged. if damaged,

have it repaired by a service

facility before use. if the plug

will not fit the outlet, have a

proper outlet installed by a

qualified electrician.