Harbor Freight Tools 99623 User Manual
Page 5
Page 5
SKU 99623
For technical questions, please call 1-800-444-3353.
Axle (39). Insert a Hex Bolt (32)
through both Wheel Assembly
Frames and the Hopper Frame (30).
Then secure the Wheel Assembly
Frames to the Hopper Frame, using
two Lock Nuts (24). NOTE: Do not
tighten hardware at this time.
(See Figure C.)
FIguRE C
HEX BOLT
(32)
gEAR BOX & AXLE
(39)
HOPPER
(16)
LOCK NuT
(24)
WHEEL ASSY. FRAME
(20)
Attach one end of the Frame Braces
4.
(31) to the Hopper Frame (30), us-
ing two Bolts (33) and two Lock Nuts
(24). Then attach the other ends of
the Frame Braces, with the Cross
Brace (45) positioned between the
Frame Braces, to the Wheel Assem-
bly Frame (20), using two Bolts (11).
NOTE: Do not tighten hardware at
this time.
(See Figure D.)
FIguRE D
LOCK NuT
(24)
CROSS BRACE
(45)
FRAME BRACE
(31)
BOLT
(33)
BOLT
(11)
HOPPER
(16)
Slide an Axle Bushing (37) over the
5.
Axle (39) and into an Axle Bearing
(38) on both ends of the Axle. Install
a Wheel (36) on each end of the Axle
and secure the Wheels using two Hex
Bolts (47) and two Hex Lock Nuts (44).
Then install a Flat Washer (34) and
End Cap (35) for each Wheel.
(See Figure E.)
FIguRE E
AXLE BuSHINg
(37)
WHEEL
(36)
END CAP
(35)
FLAT
WASHER
(34)
HEX BOLT
(47)
HEX
LOCK NuT
(44)
HOPPER
(16)
THREADED
HOLE
Note: Find the threaded hole in one
side of Axle. Install a Wheel (36) on
this end of the Axle and secure the
Wheel using one Hex Bolt (47) and
one Lock Nut (44). Then install a Flat
Washer (34) and End Cap (35) for this
Wheel. Install the other Wheel on the
Axle and secure it in place with a Flat
Washer (34) and End Cap (35).
REV 09b