Harbor Freight Tools 99623 - Manual (Page 4)

Page 4 SKU 99623 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Product Applications
Designed for spreading
powdered and granular fertilizer,
seed, sand, and ice-melt
products.
Hopper Capacity 50 Pounds (Dry)
Tires 4.10/3.50-6 / 24 PSI / Qty. 2
Construction Materials
Molded Polypropylene Hopper &
Spreader Impeller.
Steel Tubular Frame & Handle.
Pneumatic Tires.
uNPACKINg
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
ASSEMBLY INSTRuCTIONS
Read the ENTIRE IMPORTANT
SAFETY INSTRuCTIONS
section at the beginning of this
manual including all text under
subheadings therein before
assembly or use of this
product.
Note: For additional information regarding
the parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Turn the Hopper (16) upside down 1.
and install the Frame (30), using four
Screws (43). (See Figure A.)
FIguRE A
HOPPER
(16)
SCREWS
(43)
FRAME
(30)
Attach the Impeller (42) to the Gear 2.
Box & Axle Assembly (39). To do
so, insert the Screw (41) through the
Impeller, then through the Gear Box
Axle. Use the hole nearest the Gear
Box. Then tighten the Screw.
(See Figure B.)
FIguRE B
IMPELLER
(42)
SCREW
(41)
gEAR BOX
&
AXLE ASSY.
(39)
Install the Wheel Assembly Frames 3.
(20) on each side of the Gear Box