Harbor Freight Tools Chicago 94560 - Manual (Page 8)

Page 8 For technical questions, please call 1‑800‑444‑3353. SKU 94560
reV 10h
speCiFiCatiOns
Electrical Input 120V~ / 60Hz / 5A
Speed
800 ~ 3,000 SPM
6 Position, Variable Speed
Cutting Modes 4 Position, Straight Cutting & Orbital
Capacity
3-3/8” (Wood Stock)
1/4” (Ferrous Stock)
Blade Chuck
Type
Spring Loaded, Quick Change
T-Shank
Shoe Plate
Angles
0° ~ 45° Left & Right Tilt (In 15°
Increments)
Dust Chute
Diameter
1-1/2” O.D.
Accessories
2x 10 TPI Wood Cutting Blades
24 TPI Metal Cutting Blade
Rip Guide
laser light
aVOiddireCteYeeXpOsure
Max. Output: 2.5 mw,
wavelength: 650 nm
CLASS IIIa LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
CEN-TECH
3491 Mission Oaks Blvd.,
Camarillo, CA, USA, 93011
Manufacture Date:___________, _______
DANGER
aVOid eXpOsure
laser light is
eMitted FrOM this
aperture
e194601
unpaCKing
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
instruCtiOns FOr putting
intO use
read the entire iMpOrtant
saFetY inFOrMatiOn
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
tO preVent
seriOus inJurY
FrOM aCCidental
OperatiOn:
turn the power switch of the tool
off and unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.