Harbor Freight Tools Chicago 94560 - Manual (Page 10)

Page 10 For technical questions, please call 1‑800‑444‑3353. SKU 94560
Operating instruCtiOns
read the entire iMpOrtant
saFetY inFOrMatiOn
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
tool set up
tO preVent
seriOus inJurY
FrOM aCCidental
OperatiOn:
turn the power switch of the tool
off and unplug the tool from its
electrical outlet before adjusting
tool or installing accessories.
saw blade installation
blade seleCtiOn and
suitable speed
Material tpi speed
Soft Wood 6 6
Hardwood 6 5
Plastic 12 4 ~ 6
Aluminum 12 3 ~ 6
Steel 24 2 ~ 4
Tile 24 1 ~ 3
Glass 32 1 ~ 3
Leather (Knife Edge) 4 ~ 6
Rubber (Knife Edge) 4 ~ 6
Refer to the Chart to select the proper 1.
Saw Blade (68, 69) for the material being
cut.
plastiC blade
guard (58)
saw blade
(68, 69)
blade
ChuCK (24)
2. Open the Plastic Blade Guard (58).
Press the clamp button on the Blade
Chuck (24). Insert the Saw Blade (68,
69) as far as it will go, making sure the
teeth of the Saw Blade face to the front
of the tool. Then release the clamp
button on the Blade Chuck, and close
the Plastic Blade Guard.
tool adjustments
If necessary, make adjustments to the
Speed Adjuster (28) and Cutting Mode
Lever (39). Also if necessary, adjust the
Base Plate Cover (50) for the desired
bevel of cut.