2 video settings – Home Automation 68A00-1 User Manual
Page 44
2.2 Video Settings
* Video Channel Control
Video Channel Control is used to activate the channels, to set the image quality,
resolution, camera title, and encoding frame rate.
Enable
•
Select the channel that is going to be in use.
Quality
•
Choose between VBR and CBR.
•
VBR consists of Lowest, Low, Normal, High, and Highest.
•
CBR can adjust the bit rate. The bit rate tab is activated only after CBR is
selected.
The higher the quality setting, the higher the quality of the video; but you will
experience lower compression and slower transmission because of the data size.
Resolution
Three levels of video resolutions, 360x240, 720x240, and 720x480 can be
selected.
Encoding Frame Rate
Select the recording frame rate per camera. Select from 1 to 30 from the list.
42
68A00-1 NETWORK DIGITAL VIDEO RECORDER