Step 3. connect the power supply – HP SCANJET G 3010 User Manual
Page 5
1.
Insert the HP Photosmart CD that came with the scanner into the computer CD
drive.
For Windows installations: Wait for the installation dialog box to display. If the
installation dialog box does not display after a few moments, see
.
For Macintosh installations: Double-click on the CD icon that appears on the
desktop to start the installation.
2.
Click Install software to install the scanning software. Follow the onscreen
instructions to complete the scanning software installation.
Step 3. Connect the power supply
The power supply has an attached cable that plugs into the back of the scanner.
The power supply also has an AC cable that is connected to the power supply on one
end and plugged into a power outlet or surge protector on the other end.
1.
Plug the AC cable into the back of the power supply.
2.
Plug the other end of the AC cable into a power outlet or a surge protector.
3.
Connect the TMA cable from the lid to the scanner base.
Setup and Support Guide
3