Get started, Step 1. check the box contents, Step 2. install the software – HP SCANJET G 3010 User Manual
Page 4
1
Get started
Follow these steps to set up the scanner:
●
Step 1. Check the box contents
●
●
Step 3. Connect the power supply
●
●
Step 1. Check the box contents
Unpack the scanner hardware. Be sure to remove any shipping tape.
A
B
C
D
E
A
HP Scanjet G3010 scanner
B
USB cable
C
Power supply
D
Setup poster or optional Setup and Support Guide
E
Scanning software CDs
Step 2. Install the software
Caution
If you are installing the software onto a Windows computer, do not
connect the USB cable to the computer yet. Install the scanning software before
connecting the USB cable. If you are installing the software into a Macintosh
computer, you can connect the USB cable either before or after installing the
software.
2
HP Scanjet G3010