Figure f – Harbor Freight Tools CENTRAL MACHINERY 65345 User Manual

Page 12

Page 12

SKU 65345

For technical questions, please call 1-800-444-3353.

FIgurE E

BAcK LID

(20)

FIgurE F

SIDE LID

(63)

4. Locate the desired speed on the

Speed Chart on the rear of the Lathe

Bed, and move the Drive Belt (26) to

the proper grooves on the Drive Pul-

ley (25) and Motor Pulley (29).

(See Figure g.)

FIgurE g

750

1100

1600

2200

3200

5. Move the Belt Tension Lever (31)

down, adjusting tension so that 1/2” of

Drive Belt (26) deflection is measured

as shown in the following illustration.

Then retighten the Belt Tension Screw

(33).

(See Figure H.)

FIgurE H

DrIVE

puLLEY

(25)

MOTOr

puLLEY

(29)

1/2”

DEFLEcTION

DrIVE

BELT

(26)

6. Retighten the Motor Mount Screw

(27).

(See Figure D.)