Т³гж 22, Basic operation instruction – haier 32T51 User Manual

Page 22

Basic Operation Instruction

Note

With the mode of

all functions and adjustments are similar with TV. User can

check it at convenience.

AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR, HDMI1,

HDMI2, PC

HDMI connector can realize DVI connector

function with external HDMI/DVI commutator.

Select Channels with Numeric Keys
1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly.
2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV
channels.
3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV
channels.

USB signal source operation
please insert USB memory card into USB interface of TV,

press "source" key on the

remote control

or front panel to select USB signal source (if you don't insert the USB

memory card into USB interface of TV,

operation is invalid), press "OK" key to enter.

Notice: This USB interface only support move U dish, can't connect move hard drive,
also can't connect to USB interface of computer. USB support file format with Mp3/
JPG. It isn't compatible with some of move U dishes, please replace move U dish.