Heath Zenith 598-1109-06 - Manual (Page 5)

-5- 598-1109-06
1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8
Push Button Set
for One Note Tune
(Dong)
Note: Some models might require
the use of tweezers to remove
and replace the jumpers.
Figure 8 - Inside Push Button
Tune Settings
Your wireless chime has different selectable tunes: Dong (one note) and Ding-
Dong (two note). The factory setting is for the Ding-Dong tune. This tune can
be changed by following the instructions below.
•
Dong (one note tune)
Inside Push Button: Add jumper to location 8.
•
Ding-Dong (two note tune)
Inside Push Button: Remove jumper from location 8.
Note: All models have both front and back door tune capabilities. We recommend
the back door use the
Dong tune and the front door use the Ding-Dong tune.
Models that include two push buttons will come factory set for front and back
doors. Decals on the rear of the push button will indicate its setting.
Tune Setting
Push Button Set
for Two Note Tune
(Ding-Dong)