haier L20AV6-A0 - Manual (Page 9)

Power on/off and menu operation
Power on/off
If you want to switch off the TV to standby mode
press POWER button on TV or on
remote controller .
2 If the television is on standby mode ,
you could press POWER ( ) button on
remote control or on the TV to turn on the TV.
1 Connect AC-DC adaptor and power supply
wire first, then plug insert the power socket on
the wall, the indicator light.
Menu operation
1.Press MENU button to display the main menu.
2.Press VOL+/- or CH+/- to select the option
3.Press MENU button to enter the sub-menu and
select the system you want to adjust.
4.Press VOL+/- button to adjust the parameters
after select the right options.
5.Press TV/AV to exit the menu.
Power on/off
DC Standby Button
Power supply auto-off function
Direct-digit Choosing Button
1
6
7
8 9
2
3
4 5
0
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
es
When the BLUE SCREEN is set ON, and there
is no signal , blue screen with
( XX
is the inputs)protection works, and ,in15
minutes later without any operation, it will
change into standby status.
XX no signal