Hoover S1055 - Manual (Page 8)

How to use
CAUTION: POTENTIAL SHOCK HAZARD This vacuum cleaner is
not intended to be used where water may be present. Carpet will
retain moisture long after it has been wet. This vacuum cleaner
should not be used on wet or moist carpet.
Rug and floor nozzle
Use the combination rug and floor nozzle to clean both carpet and hard sur-
face floors. To connect rug and floor nozzle to the wands and hose, rotate
the plastic latch ring on the wand to accept the button projection on the end
of the rug and floor nozzle. Turn the latch ring to lock in place. To remove,
reverse the procedure.
Hard surface floors
Put the brush in the floor position
by moving the brush lock lever to
the “FLOOR” position on the noz-
zle.
Rugs
Put the brush in floating position by
moving the brush lock lever either
to the left or right to the “RUG”
position. You will find it convenient
to use only one hand when oper-
ating the cleaner on rugs and
carpet.