Hoover S1055 - Manual (Page 6)

How to assemble
Connect hose
Insert hose connector into opening
in bag door by fitting prongs on
end of hose connector into cor-
responding slots in opening. Turn
hose connector in either direction
until it locks into position. Turn in
opposite direction to remove from
cleaner.
2. Attach extension
wands, cleaning tools and
nozzle
a. To attach extension wand to the
hose, rotate the plastic latch ring
on the hose grip to accept the but-
ton projection on the end of the ex-
tension wand. Turn the latch ring
to lock in place. To remove,
reverse the above procedure.
b. Cleaning tools may be attached
directly to the hose grip by follow-
ing the above directions.
Attach the second wand when us-
ing the rug and floor nozzle or for
added length when using cleaning
tools.
To attach the second wand and the
rug and floor nozzle, follow the
same procedure as when attaching
wand or tools to hose grip.