Honeywell HCC-745NTW/PTW - Manual (Page 11)

- 11 -
5. On Screen Display
5.1 Understanding the On-Screen Display
a. Press MENU briefly to confirm the current operation setup.
The information (see Fig 5-1) will disappear after five seconds
if there is no button action.
b. When it zoom in or out pressing UP or DOWN key,
whole OSD Information will appear and then disappear.
Press (+) , (-) button, only upper part of OSD Information
( for displaying camera mode ) will appear and then disappear.
(It is for checking current whole camera mode and zoom position )
c. Even though the OSD message disappears the Camera ID
or Title will continue to display. If you do not wish to display the ID,
you can change the display position. (see 5.11)
Options are: Bottom Right, Top Left, Top Right, Non display.
* If you do not need to display the Operating OSD (for example,
for an external text overlay board), it can be set to OFF at all times
through a remote control using RS232C or RS485 connection.
④ ⑥
①
② , ③ ② , ③
② , ③
⑤
Manual mode MWB
WB MODE
Zoom WIDE Dx1.0 << WIDE
Zoom TELE Dx2.5 >>TELE ZOOM
DISPLAY
①
Fluorescent (4200°K) FRS
User mode USR
One Push mode AWC
1/50000 1/50000
1/10000 1/10000
1/4000 1/4000
1/2000 1/2000
1/1000 1/1000
1/500 1/500
1/250 1/250
Outdoor preset (5400°K) OUT
NTSC:1/120, PAL:1/100 FL
Auto Trace White Balance ATW ⑥
Indoor Preset (3200°K) IN
DESCRIPTION OSD Format FUNCTION
NTSC:1/60, PAL :1/50 1/60 (1/50) Shutter
Speed
⑤
Back Light ON BL
Back Light OFF Non display Back Light ④
See 5.11 ■■ …■■ TITLE ③
ID : 0 None display CAMERA ID ②
ID : 1 ~ 255 ID : 002
1/20000 1/20000