HP 2060 K110 - Manual (Page 30)

5. Align cartridges.
Related topics
• Choose the right cartridges on page 26
• Order ink supplies on page 25
Use single-cartridge mode
Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode
is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the
product can only print jobs from the computer.
NOTE: When the HP All-in-One operates in single-cartridge mode, a message is displayed on screen. If the
message is displayed and two print cartridges are installed in the product, verify that the protective piece of
plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge contacts,
the product cannot detect that the print cartridge is installed.
Exit single-cartridge mode
Install two print cartridges in the HP All-in-One to exit single-cartridge mode.
Related topics
• Replace the cartridges on page 26
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This warranty
does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty
date has not been reached. The end of warranty date, in YYYY/MM/DD format, may be found on the product as
indicated:
For a copy of the HP Limited Warranty Statement, see the printed documentation that came with the product.
Chapter 6
28 Work with cartridges
Work
w
ith
cartridg
es