Ultrium features, General documents and standardization – HP Ultrium Tape Drive User Manual
Page 8
8
Ultrium features
General documents and standardization
•
Small Computer System Interface (SCSI-1), ANSI X3.131-1986. This is the ANSI authorized
standard for SCSI implementation, available through ANSI
•
Enhanced Small Computer System Interface (SCSI-2), ANSI X3T9.2-1993 Rev. 10L,
available through ANSI
Handling errors
2 SW Integration: ch. 5
How error correction works
6 Background: ch. 4
Logs—see the LOG SENSE command
3 SCSI: ch. 4
Recovering from write and read errors
2 SW Integration: ch. 7
Software response to error correction
2 SW Integration: ch. 3
Software response to logs
2 SW Integration: ch. 3
TapeAlert log
2 SW Integration: ch. 7
SCSI Drives
FC Drives
SCSI Drives
FC Drives
Adaptive Tape Speed (ATS)
6 Background: ch. 1
Autoload
1
HW Integration: ch. 2
Automation Control Interface (ACI)
1
HW Integration: ch. 2
6 Background: ch. 1
Cartridge Memory (LTO-CM)
1
HW Integration: ch. 2
2 SW Integration: ch. 5
6
HW Integration: ch. 5
Data Compression, how it works
6 Background: ch. 5
Data Compression, managing
2 SW Integration: ch. 5
Design principles
6 Background: ch. 1
OBDR and CD-ROM emulation
6 Background: ch. 1
2 SW Integration: ch. 7
Performance optimization
1
HW Integration: ch. 8
n/a
2 SW Integration: ch. 1
Performance, factors affecting
2 SW Integration: ch. 4
Software design
2 SW Integration: ch. 1
Supporting Ultrium features
2 SW Integration: ch. 5
Ultrium Format
6 Background: ch. 2